|
| Place of Origin: | China |
| Brand Name: | ORIENTRONIC |
To provide an accurate quotation and design, please specify the following details:
1. Dimensions
Large LCD panel: length and width (mm)
Small LCD panel: length and width (mm) (if applicable)
2. Display Mode
Positive display – e.g. white background with black characters, yellow‑green background with black characters, or grey background with blue characters.
Negative display – e.g. blue background with white characters, or black background with white characters.
3. Polarizer Type
Transmissive – requires a backlight to be visible.
Transflective – can be used with or without a backlight (backlight optional).
Reflective – no backlight; relies on ambient light.
4. Operating Voltage
Typically between 3V and 5V (custom voltages available upon request).
5. Operating Temperature
Choose from the following ranges:
0°C ~ +50°C (standard)
-10°C ~ +60°C
-20°C ~ +70°C (wide temperature)
-30°C ~ +80°C (ultra‑wide temperature)
6. Viewing Direction
Specify the preferred viewing angle (clock‑face notation):
6 o'clock – viewed from below
12 o'clock – viewed from above
3 o'clock – viewed from the right
9 o'clock – viewed from the left
7. Connection Method
Select one of the following:
Heat‑seal connector (heat‑seal pin)
Zebra connector (elastomeric / conductive rubber strip)
Metal pins (pin header)
8. Driving Method
Please provide the duty cycle and bias ratio, e.g. 1/4 duty, 1/3 bias.
(These parameters are determined by the customer’s driver IC and specific requirements.)
