2.2 Inch SPI Serial Port Arduino Tft Touch Screen 176X220 LI9225

2.2 Inch Arduino LCD Display module Product Features:

• 2.2-inch color screen,support 16BIT RGB 65K color display,display rich colors
• 176x220 resolution, clear display
• Using the SPl serial bus, it only takes a few lOs to illuminate the display
• With SD card slot for convenient function expansion
• Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms
• Military-grade process standards, long-term stable work
• Provide underlying driver technical support

2.2 Inch Arduino LCD Display module Product Parameters

Display Color:16BIT RGB 65K color
Screen Size:2.2(inch)
Type:TFT
Driver IC:ILI9225
Resolution:176*220 (Pixel)
Module Interface:4-wire SPl interface
Backlight:3 White Led
Active Area:34.85×43.56(mm)
Module PCB Size:42.46×67.20 (mm)
Operating Temperature:-20℃~60℃
Storage Temperature:-30℃~70℃
Operating Voltage:5V/3.3V
Power Consumption:TBD

Pin Definition

1 VCC:LCD Power positive (3.3V~5V)
2 GND:LCD Power ground
3 GND:LCD Power ground
4 NC:Not defined, reserved
5 NC:Not defined, reserved
6 NC:Not defined, reserved
7 LED:Backlight control, high level lighting,if not controlled, connect 3.3V always brigh
8 CLK:LCD SPI bus clock signal
9 SDI:LCD SPI bus write data signal
10 RS:LCD register / data selection signal,high level: register, low level: data
11 RST:LCD reset signal, low level reset
12 CS:LCD chip select signal, low level enable

Applications:

Digital photo frame, touch handwriting board, e-book, MP3 player, handheld instrument, etc.